Professional paint correction for detailers, garages, and other car detailing businesses. - Removes sanding marks and holograms from Step 1 - Refines the paint and restores gloss - Perfect in combination with our Gecko Polisher (item no. 687812) The Gecko Pro Compound Step 2 is a medium-cut polishing compound specifically developed for the second step in the paint correction process. This high-quality compound removes sanding scratches (P1200-P3000), car wash scratches, polishing marks, and paint imperfections left behind after coarser polishing with the Gecko Pro Super Cut (Step 1). Ideal for refining the paint and restoring an even, deep gloss. Thanks to its balanced formula, the Gecko Pro Compound ensures a smooth and glossy surface free from dust or micro-scratches. Use this product in combination with the Gecko Medium Polishing Pad for the best results. Please note: This compound does not yet offer definitive protection. For an optimal finish and paint sealing, we recommend finishing with the Gecko Pro Wax Guard (article number 687692). Application & Use The Gecko Pro Compound has been developed for professional use in the second phase of the polishing process. Suitable for all paint types, including sensitive or dark paints where a perfect finish is essential. View the complete Gecko Pro-Line range for a full multi-step paint treatment. Instructions for use Use the Gecko polishing machine with the Gecko Light Cutting pad and sufficient product. Shake well before use and remove any irregularities beforehand using suitable sandpaper if necessary. 1. Preparation: Ensure the paint is clean and dry. For best results, start with the Gecko Pro Super Cut (Step 1) to remove deeper defects. 2. Application: Apply a small amount of compound to the Gecko Light Cutting Pad. 3. Distribution: Distribute the product evenly over the surface to be treated at low speed. 4. Polishing: Increase the speed to 1500 - 2000 rpm and work in overlapping strips of approximately 1 m². Repeat if necessary for a deeper shine. 5. Wiping off: Remove excess product with a clean Gecko Microfiber cloth from the 5-pack (item no. 687853). 6. Finishing: Finish with Gecko Pro Wax Finish & Protect (item number 687692) for protection and long-lasting shine. If necessary, you can first proceed with Gecko Pro Fine Finish (Step 3) for further finishing. Professional tip: Let the Gecko Pro Compound do its work. Work in calm, overlapping strips and maintain even pressure. The Gecko Pro Compound is designed so that the abrasive particles gradually break down during polishing. Therefore, give the product time to fully absorb — you will notice it becoming increasingly transparent. Only then will you get the most out of this polishing step. Stopping too soon often means you have to start over later.